How to associate the DualShock 4 controller from the PS4 at the PC via Bluetooth

Couple the DualShock 4 controller using Bluetooth to computer is quite simple. See the step-by-step guide for how to perform this task below.

HOW TO COUPLER DUALSHOCK 4 VIA BLUETOOTH

The coupling process does not require any additional software or tool; All you need is a Bluetooth receiver on your PC. If you do not meet that, you can also buy a USB Bluetooth dongle.

Bluetooth Twinning Parameters DualShock 4

Step 1:

To couple the DS4 to a computer, first put the controller in coupling mode by simultaneously pressing the PlayStation and Share buttons and at the same time for 3 seconds. Hold these buttons until the light bar starts flashing quickly.

Operating System — Windows 7 / Windows 8

If your operating system is Windows 7, you must then right-click on the Bluetooth icon in the lower right corner of the window. If you are using Windows 8 or higher, open the Bluetooth settings by clicking on the speech bubble icon in the taskbar in the lower right corner. This will launch Action Center, click Bluetooth and wait for the wireless controller to appear. Click on it and type 0000 to type the pair code.

Operating System — Windows 10

If you use Windows 10, right-click on the Bluetooth icon in the lower right corner and click Add a Bluetooth device. This will open Bluetooth and other devices. Make sure your Bluetooth on your computer is set to ON and click Add a Bluetooth device. Bluetooth or another device. When asking what type of device you want to add, click the upper option that must be Bluetooth. Your computer will start searching for a Bluetooth device. If your controller continues to flash quickly in step 1, it should find it within 5 seconds.

That's it; The controller is now connected wireless. If you encounter a wireless controller detection problem after the Bluetooth activation, resolve the Bluetooth adapter problems from your PC by updating the drivers.